LibreCAD is a free opensource CAD software that is available on Windows, Linux & MAC.
So for some reason I had a time figuring out how to use the text commands in LibreCAD to draw lines at specific angles at specific lengths. I think it has something to do with ortho vs polar degrees but I’m still not sure. I have it in my head that it should be 0/360, 45, 90, 135, 180, 225, 270, 315, 360/0 but instead it is 90, 45, 0/360, 315, 270, 225, 180, 135. Again I might be alone on this but that’s how I visual it in my head while drawing.
Unable to find a graphic at the time, again probably my fault, so I made one.
This build works great and contains root (if you remount adb).
1.) Download update and place on a thumb drive (at least 512MB capacity) in the root directory of the device.
2.) Plug thumb drive into NSZ-GT1.
3.) Enter Sony Recovery by first unplugging the power from the box, then while holding the power button plug in the power cable. Continue to hold the power button until the Sony Recovery menu displays.
4.) Choose “System update with USB” option (option #3).
5.) The device will ask you if you would like to upgrade, choose 1 for yes.
6.) The device will present a progress bar and will reboot when completed. (Do not turn off the box during this period)
7.) Enjoy HC on the sony NSZ-GT1